37.5 hour work week

Not sure in Linux, could be a driver or kernel configuration. I don’t know a way to double check it. When booting into windows it’s at x16. So not a hardware or bios issue.

Hardware info (hwinfo) or similar. Be able to check all voltages, speed and temps while testing new hardware. For example my ARC A770 has little to no info, and shows running at pcie x1.

Edit: mistakingly thought link width was x4, but looking at it again shows x1

Well, it was addressing the pay issue, and it is the most secure path to higher paid position fast. Moving on to new stuff comes naturally and the industry will push you to their next hotness, so not really a problem.

If your goal is to make yourself more valuable to employers/clients the best path is to specialize in some critical and niche enterprise tech. People that are good at stuff businesses were lured into using get paid very well. In my case it was SharePoint, but that’s just an example.

Knowing your way around the OS is taken for granted in these positions, so you have one piece of the puzzle, which is great, but you need the other pieces.

But be careful, if I have to choose between two experts, one with basic win+linux and the other only linux, I’m choosing the former.

I recall having the image not found error last time. A mix of creating the USB with another program and tinkering with bios solved the issue. Sorry can’t be more specific, but Linux is all about tinkering, so have fun :)

I only use 2 PCs with windows. An old laptop with XP I use for vehicle diagnostics and repair manuals, and a Win10 laptop my employer lent me for work. Option number 1 for both.

Yeah, monitors were somewhat dumb, just received and did what the vga output asked to do.

The noise most likely came from the semiconductors that controlled the magnet field that directed the rays onto the screen. These components are selected for a specific speed that the monitor can handle. So going under or over it’s spec can make something resonate in the audible range, and could even destroy the components if stressed too much.

The thing is that for each resolution and refresh rate you had two values to configure, one for the vertical speed in Hz, and horizontal speed in kHz. These values were usually specified in the owners manual. Typos can happen, and this was quite a risky operation.

A 19" monitor was quite big for the day, and expensive! I hope your gf didn’t beat you up too much for that :)

Not the installation strictly speaking, but my most “funny” fuckup was setting up xfree86. There was a configuration for crt monitor scan frequency that you had to setup. I messed up something and the monitor started to squeel like crazy and quickly hit hard reset in panic.

The monitor didn’t die, but it had a slight high pitch noise to it after.